Squarell integration
High-frequency vehicle data platform for granular telematics — speed, fuel, tachograph and sensor data in real time.
What is Squarell?
Squarell Technology turns the signals of virtually any vehicle make and model into one harmonized data set. Its CAN-bus connectivity devices read the vehicle and tachograph data, and fleets and telematics providers use that data through Squarell’s Vehicle Data Platform. Squarell also offers remote tachograph download.
What syncs between Squarell and Transportial
- Into Transportial
Vehicles
Squarell devices are imported as vehicles with a board computer and paired with the right truck using the VIN the device reports.
- Into Transportial
Live positions
GPS positions arrive every two minutes and feed the live map, trip progress and ETA calculations.
- Into Transportial
CAN-bus data
Odometer, fuel used and fuel level, engine hours, speed, RPM, engine temperature, axle weights, PTO status and distance to service become vehicle sensors. Electric trucks add battery and charging data.
- Into Transportial
Live tachograph status
Driver work states (driving, working, resting), driving-time warnings and the inserted driver cards.
- Into Transportial
Activities and trip totals
Engine on/off, driving and standstill periods are derived from the data and logged on the vehicle, together with Squarell’s trip totals and driver-behavior counters.
- Into Transportial
Tachograph files
Remotely downloaded tachograph (DDD) files are stored as documents with the vehicle.
How to connect Squarell
Request API credentials (username and password) for the Squarell Vehicle Data Platform from Squarell.
Add the Squarell integration in Transportial with those credentials. Devices are imported as vehicles and matched on VIN.
Switch on the data sets you need — positions, CAN data, tachograph, EV data, maintenance. Each runs as its own job, so you only pull what you use.
Typical use case
A fleet with trucks of several brands, not all with a factory telematics subscription. With a Squarell device in every truck, planners get one uniform set of positions, fuel and tachograph data in Transportial whatever the brand, and fleet managers use the same odometer and fuel figures for cost and fleet reporting.
Frequently asked questions
What is Squarell used for?
Reading standardized data from the CAN-bus and tachograph of vehicles, independent of the brand, and making it available to fleet and telematics software through an API.
Which Squarell data comes into Transportial?
Vehicles, GPS positions, CAN-bus values such as fuel, odometer, engine hours and axle weights, live tachograph status and driver cards, EV battery data, trip totals, driver-behavior counters and remote-downloaded tachograph files.
Can Transportial send trips or messages to the driver through Squarell?
No, the Squarell integration only reads data. Drivers receive trips and messages in the Transportial driver app, or through a board-computer integration such as Transics or Webfleet.
How often is the data updated?
Positions every two minutes, the other live data sets every five minutes, and the vehicle list and tachograph files every six hours.
Connect Squarell to your TMS
Transportial’s integration framework links your operation to Squarell and any other system you run.